Belimo Assistant 2 Release Notes
Version 6.12.8: November 2025
As Microsoft has officially ended support for Windows 10, we will also be discontinuing support for the Belimo Assistant 2 on Windows 10.
Updates
- Master data enhancements for the new GM series
- Master data enhancements for existing Belimo products
- Sensor KPI for VRU/VAV devices has been renamed to Δp Sensor
- Range of rotation value is now dynamically updated when adaptation procedure is concluded for VRU/VAV devices
Fixed Issues
- Fixed an issue with displaying negative values in % for VRU devices
- Fixed an issue with displaying the right data set in Live Trend for VRU/VAV devices
- Fixed an issue with the upper limit of V’nom and V’reference for VAV compact devices
Version 6.12.5: October 2025
New Features
- Automatic Scan for configuration and management of devices in MP networks
- The Manufacturing Tool is updated to support VRU and ZoneEase devices
- Support for newly defined units: volumetric air flow, area and length
- Device parameter enhancements for VRU/VAV devices: Calibration Altitude and Installation Altitude
- Enhanced device adaptation workflow with monitoring of ongoing processes for Damper Actuators and Control Valves
- Enhancement of visualizing the air flow control limit for VAV devices
- Enhancement to visualize the controller limit in m3/h for VRU/VAV devices
- Workflow and UI/UX usability improvements for existing and new integrated Belimo products
- Master data enhancements for existing and new integrated Belimo products
Belimo Assistant Link Features
- Mobile app Bluetooth-to-NFC field device connections
- Mobile app Bluetooth-to-MP Bus field device connections
- Windows app USB-to-MP Bus field device connections
- MP Bus collision detection
- Firmware updates via Bluetooth
- Battery and connection status indication
Fixed Issues
- Fixed an issue with the visibility of Bus-Watchdog settings for Modbus/BACnet for VRU
- Fixed an issue with communication workflow on KNX devices
- Fixed an issue with integration and communication settings not being visible for unpowered VAV devices
- Fixed an issue with flow characteristic datapoint not being available in powered mode for Energy Valve (EV)
- Fixed an issue with incorrect relative setpoint displayed for LMV-D3-MP devices
- Fixed an issue with incorrect controller position at 10V setpoint for LMV-D3-MP devices
- Fixed an issue with incorrect field display in the Manufacturing Tool pre-commissioning
- Fixed an issue with application number not being visible for ZoneEase devices
Version 6.10.8: July 2025
Fixed Issues
- Fixed an issue with overwritten datapoints after update on new integrated Belimo Damper Actuator Products
Version 6.10.7: July 2025
Updates
- Master data enhancements for maximum temperature range setting on Thermal Energy Meter (TEM)
- Master data enhancements for CQ actuators
Fixed Issues
- Fixed an issue with operation time display on JR actuators
- Fixed an issue with incorrect display of switching position on new integrated Belimo Damper Actuator products
- Fixed an issue with communication settings on KNX actuators
- Fixed an issue with creation of configuration files on CMV-100-MP
Version 6.10.6: June 2025
Updates
- Updated Windows Installer to ensure continued trust and compatibility
Fixed Issues
- Master data enhancements for existing and new integrated Belimo products
- Fixed an issue with cloud data upload for Room Operating Units
Version 6.10.0: April 2025
New Features
- Configuration and management of devices in MP networks with Auto-Addressing and De-Addressing
- Continuous live trending for up to an hour with automated resume functionality
- Streamlined workflows for quick configuration of RS485 protocol parameters on Belimo products. This feature is also available in the Manufacturing Tool.
- Device health status with power state, warnings, errors and overall device status information
- Display device parameter live values and the actual connectivity status
- Device data display with basic and extended viewing options
Updates
- The Manufacturing Tool is updated to support uninterrupted data writing on currently active devices even when the computer is locked
- Updates for GM and 6-way EPIV
- Master data enhancements for ZoneEase actuator
- Various compatibility and quality enhancements for existing and new integrated Belimo products
- Live trend stability improvements
Fixed Issues
- Fixed a stability inconsistency when executing the Live Trend workflow in some device types
- Fixed an issue when users attempt to share a live trend
- Fixed an issue with missing terminating resistor for Modbus RTU on LMV-D3-MOD
- Fixed an issue with calculated dP@Vnom for Vnom
Version 6.3.2: March 2025
Fixed Issues
- Fixed an issue with the MP command being not correct for Fail-Safe actuator
- Fixed an issue with the display of control signal for the 6-way EPIV
- Master data enhancements for the integrated Belimo JR products
Version 6.3.0: January 2025
Updates
- Release of Belimo Assistant 2 in Mainland China
- Master data enhancements for the integrated Belimo products
- Various compatibility updates to support further Belimo products
Fixed issues
- Fixed an issue where control signals were still displayed when Setpoint Source is Bus and Protocol is BACnet MS/TP
- Fixed a display issue relevant for CQ actuators
Version 6.2.3: November 2024
Fixed issues
- Fixed an issue with 6-way EPIV devices
- Fixed an issue with VAV Compact devices where the Belimo String could not be read from the device
Version 6.2.2: November 2024
Updates
- Update to support NFC Connectivity for Energy Valve (EV) and Thermal Energy Meter (TEM)
- Application updates for Apple iOS18
- Update for ZoneEase, including harmonization between mobile and desktop device parameters
- Updated EULA/3rd party License Agreement
Fixed issues
- Fixed an issue where Live Trend cannot start for ZoneEase devices
- Fixed an issue where creating CSV files during sharing is not working for Live Trend
- Fixed an issue where Live Trending is not correctly compiled after some minutes
- Fixed an issue on Manufacturing Tool where angle correction was not possible with negative offset
- Fixed an issue where general information data was empty when reading powerless devices
- Fixed an issue on copy paste workflows for LMV-BAC-001 when reading powerless device
- Fixed an issue with empty workflow configuration for LMV/VRU
- Fixed an issue where setup workflow shows empty parameters for LMV-D3-MP
- Fixed an issue where the set values in override control were not written to device for LMV-D3-MP
- Fixed an issue where switching between NFC and Bluetooth did not work when triggering meter activation workflow
Version 6.1.1: September 2024
Fixed issues
- Fixed an issue where active calibration failed when the view was exited
- Fixed an issue where the relative position of the labels was lost
- Fixed an issue where some labels did not display correctly
- Fixed an issue where the device view page did not refresh when NFC disable workflow was executed via USB
- Fixed an issue with the ZTH Driver not being installed correctly when upgrading via MSI Installer
- Fixed an issue where the update for all users did not work correctly
- Fixed an issue where the line values went out of y axis
- Fixed an issue where the trend was not resumed after sharing
- Fixed an issue where trend label was not always visible
- Fixed an issue where volumetric flow trend went outside the graph for LMV-D3-MP
- Fixed an issue where renaming of the ZIP-BT-NFC failed
- Fixed an issue whereby the connection was lost during write parameter on non-activated EV with ZIP-BT-NFC
- Fixed an issue whereby data did not upload to the cloud when the Apple device was disconnected from the internet
- Fixed an issue with the PWM parameter being always visible
- Fixed an issue with the MP Address not being available for LMV-D3-MP on NFC
- Fixed an issue with the P'Nom parameter max value range being missing
- Fixed an issue with the parameter designation for LMV-D3-MP not reading correctly in powerless mode
- Fixed an issue where written values did not match the ones on the sensor LCD
- Fixed an issue where the threshold for the heating application was not visible
- Fixed an issue where the threshold temperature setting in °F was not working